Scott,
You might want to try the highly rated Ford Motorsport FL1-A full size
filter original, as I do.
A number of right angle filter adapters are available from Ford
Motorsport. Here is a total 90 deg filter, and yet another is
Motorsport M-6880-A50. Both detailed on TigersUnited.com:
http://www.tigersunited.com/resources/Dealer_Accessories/mp-FilterAdapter1.asp
I use the M-6880, and it clears the frame motor mount bracket with a
slight filing of the sharp motor mount corner that attempts to puncture
the filter body!
The original full flow filter, head mounted, may be just a little tricky
to change filters, but a lot easier when you do not have to get under
the car.
http://www.tigersunited.com/resources/wsm/wsmB20.asp
Steve
___
Steve Laifman
Editor - TigersUnited.com
Scott Hutchinson wrote:
>Gents,
>
>The oil filter that came off the side of the engine is a stp s3512(it's a
>little short one that just screws into the side of the block). Can't seem to
>find one of these at the local auto parts store.
>
>Anybody know one that will fit?
>
>Scott Hutchinson
|