Tony
C2OZ-6384-A Ring gear is listed as 160 teeth 13.258" OD
I also suggest you test run the starter gear around the ring gear. The ring
gear on my Tiger was chewed up and I found that the gear on the starter was
not totally compatible.
Ron Fraser
-----Original Message-----
From: owner-tigers@autox.team.net [mailto:owner-tigers@autox.team.net] On
Behalf Of Tony Somebody
Sent: Saturday, October 07, 2006 7:10 PM
To: Teepen, Jere
Cc: Beamclub
Subject: Re: Spacers
I found the place the spacers had been. The body man
shimmed the crossmember down so everything was
copasetic-- that is of course except the work he didnt
do properly so he wouldnt need spacers or shims as
they where. THANKS for everyones imput. I guess my
email was confusing when asking about the ring gear.
Does a Tiger use a 157, like I thought or a 164 tooth
like is/was on my flywheel. Thanks again, Tony
Tired of spam? Yahoo! Mail has the best spam protection around
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.407 / Virus Database: 268.13.1/466 - Release Date: 10/7/2006
|