Tony
I have the instructions for an old Allison Opto-Electric Ignition
system but there is no Purple wire; just red and black going to the coil
with the case screws as ground. You must have a newer unit.
A Google search indicates that Allison is now Crane. You might
want to email Crane to see if they have a wire diagram for your model. I
took a quick look on their web site and I only saw red, yellow and black
wires. Red and yellow wires go to the coil, black wire is ground.
Generally;
Black wire is ground
Red wire goes to + side of coil, which leaves your purple wire going to the
- side of the coil; but that is just my guess. I would contact Crane first.
Personally, I would remove the Allison unit and install a Pertronix set up.
Ron Fraser
-----Original Message-----
From: owner-tigers@autox.team.net [mailto:owner-tigers@autox.team.net] On
Behalf Of tonbren
Sent: Monday, July 03, 2006 7:23 PM
To: tigers@autox.team.net
Subject: Allison Ignition
Hi all
I have a Series 5 Alpine I am restoring and it is fitted with an older
style Allison XR700 Ignition Module. I cannot find a wiring diagragm to suit
the wiring code. It has 3 wires Red, Purple & Black coming from it I assume
2 go to the coil and 1 to earth.
Any ideas
Tony Day
South Australia
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.8/380 - Release Date: 6/30/2006
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.8/380 - Release Date: 6/30/2006
|