Guys,
Thanks for the help on the heater valve. I spent quite a while at NAPA
the other day trying to find something that would work. Anything that
looked close was not available any longer. I'm not too concerned about
how it looks because eventually I will be hiding the valve via Larry
Paulick's article. However, in a push to get the car finished for TE/AE
United, I'm sticking with the stock setup for now. So, if anyone has a
part number that they think may be currunt, I would be most
appreciative.
Cheers,
Joe Parlanti
B382000026
-----Original Message-----
From: owner-tigers@autox.team.net [mailto:owner-tigers@autox.team.net]
On Behalf Of Randy Smith
Sent: Monday, June 26, 2006 10:11 PM
To: tigers@autox.team.net
Cc: Peter Laurinaitis; Ron Fraser; 'Joe Parlanti'
Subject: Re: Couple of Questions
If you are going to use a Honda valve, don't buy the original Honda
model. It's expensive and works backward. As I recall, what you want
is the NAPA replacement that is made for the Honda. It's cheap and
works well. It does not look like the original, so hiding it inside the
heater core box might be preferred.
-Randy
--
Randy Smith
INNER QUEST, Inc.
34752 Charles Town Pike
Purcellville, VA 20132
703-478-1078
540-668-6699
540-668-6253 fax
InnerQuestOnline.com <http://www.innerquestonline.com/>
RSSmithIQ@cs.com
Tiger- B382000189
|