Thanks for the dimension on the HT locator pins. Mine top was 47". The PO
had cut one pin off . No idea why except the B pillars were pushed in. With
your
info, replacing the pin and pushing the B pillars out I ended up with a HT
that fits almost like it should. Both the rear locator pins were gone also.
Made new ones of SS. Massaged the thickness of the RR corner pad.
I believe, with my experience on this top I could do another one including
new rubber, paint, side glass, re-chroming latches, but no headliner, for
about $7,000.00. (That includes my time @ $1.00/hr) ! ! ! !
Thanks again for the info !
Bud Williams
|