Thanks Tom:
Yeah, it looks like a 'Z' shaped bracket. Can't imagine why it was removed.
Oh, well.
Thanks again.
Best Regards
David
Tom Witt wrote:
>David,
> At first I thought Steve was talking about a round thin disk about the size
>and thickness of a quarter welded near the bottom of the arm the cable
>attaches to. There is a small nut welded to the bellhousing tunnel about
>3/4" off the large access hole at about the 4 o'clock position. Threaded
>into the nut is a small bolt. I then realized that was a stop for pedal rest
>at idle.
>But then I looked at your reference in the manual. On closer look I saw two
>nuts welded on the outside of the housing near where the pedal moves to
>under full throttle. I'm going to look through my box of parts from the PO
>and see if I have one. I recall seeing something like it and wondering what
>it was. If I find it I can trace it out and send it to you.
>Tom
|