Tim Ronak wrote:
"Someone just sent out a photo if the LAT intake install and it showed a
photo of the original heater hose clamp on the left side of the
firewall. I
could really use one of those if someone has one as it might help reduce
chaffing on my Ram air box. Any help would be appreciated."
There is a difference between the clamp on the Mark 1 vs the Mark 1A.
The one shown in the picture looks like a Mark 1A style. I reproduced a
handful of them and traded them to Rick ca SS for some other parts.
That was a long tie ago, so they may all be gone.
The Mark 1 clamp looks more like the clamp that holds the main wiring
harness under the dash.
I don't know the Mark 2 system at all.
Mark
|