Re: Vice-Grips (throttle calbe)

[DJoh797014@aol.com]

When I put a Holley 600 CFM on my F4B, I too noticed
that my original throttle cable was too short.  Then I 
noticed that the Holley had several holes in the throttle
plate where the cable could attach.  One of the holes is 
positioned just right.  I enlarged the hole so the cable fit. 
Slipped it in and inserted the cotter pin.  NO adjustment was
needed.  Just dumb luck I suppose.  Perhaps its
because I am still using the original cable,

Dave Johnson