Jeff
Here is what is in the Tiger manual;
Castor = 3 deg 50' positive
Camber = 30' + or - 15' positive
Toe-in = 1/8"
All steering angles and dimensions must be checked with the car on gap
gauges.
Try to get equal Castor around 3 to 4 or the most you can get, then
set the Camber. I put in 1 deg negative camber on my Tiger. Now set the
Toe-in; if you have the original steering rack arm get as close as you can
to 1/8". I did not use the gap gauges or load the car as described in the
manual.
Ron Fraser
-----Original Message-----
From: owner-tigers@autox.team.net [mailto:owner-tigers@autox.team.net] On
Behalf Of Radialman@aol.com
Sent: Wednesday, September 10, 2003 2:47 PM
To: tigers@autox.team.net
Subject: Specs for TIGER
-- I noticed my mk 1 pulls to the left when driving...I have just restored
my front end....was hoping someone on the list here could give me the specs
so I can give it to the alignment shop...so as to get to car to steer
straight...( down the highway of life ) thanks.
I am hoping to bring the car to the Palo Alta British car meet this next
weekend....thanks for the info ASAP.
cheers.
Jeffrey Wilkins
Director of Photography
LA Based
Cell: 213-999-6714
Visit my website:
http://www.unlimited-production.com/
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.515 / Virus Database: 313 - Release Date: 9/1/2003
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.515 / Virus Database: 313 - Release Date: 9/1/2003
|