tigers
[Top] [All Lists]

Re: More questions...Tiger Side Trim...

To: SLaifman@socal.rr.com, tigers@autox.team.net
Subject: Re: More questions...Tiger Side Trim...
From: "Paul R. Breuhan" <prbreuhan@hotmail.com>
Date: Thu, 03 Jul 2003 10:06:37 -0400
Steve,
Now I know why the last hole in my quarter panel was filled with a nut and 
bolt, it either rusted or was welded to the body, the head ground off and 
body work completed.

I can see having the front one like that, to keep the molding very secure.

Paul


>From: Steve Laifman <SLaifman@SoCal.rr.com>
>To: Dan & Lori Fitzgerald <danlorifitz@earthlink.net>
>CC: "Paul R. Breuhan" <prbreuhan@hotmail.com>, tigers@autox.team.net
>Subject: Re: More questions...Tiger Side Trim...
>Date: Wed, 02 Jul 2003 11:08:25 -0700
>
>One more thing.
>
>The front fender first clip, and the rear fender last clip are NOT snap-on 
>rivet type heads, nor the nylon substitutes, but square headed (thin) bolts 
>that are attached with nuts and lock washer. Mild steel, of course, so they 
>can rust.
>
>I replaced mine with small stainless steel bolts.  Filed the head square, 
>then thinned it down to slide in the groove clearance in the trim.  
>Inserted through existing hole (in my case) and bolted down after all is 
>aligned.  Head accessible from inside trunk and front fenderwell.
>
>A small amount of work in the ONLY place the back side is accessible, and 
>well worth a set of cheap jeweler's files.
>
>Steve
>
>Dan & Lori Fitzgerald wrote:
>
>>Paul,
>>Sunbeam Specialties has the clips for the stainless steel trim.  They come
>>in a package with the required amount and these new clips and will keep 
>>the
>>molding away from your paint.  The clips are set at the same spacing of 
>>6.5"
>>apart.  The only space that is not at 6.5" is at the very front of the 
>>cars
>>headlights.  Start your spacing after the Tiger script and move forward.
>>
>>Dan
>>-----Original Message-----
>>From: owner-tigers@autox.team.net [mailto:owner-tigers@autox.team.net]On
>>Behalf Of Paul R. Breuhan
>>Sent: Wednesday, July 02, 2003 9:28 AM
>>To: tigers@autox.team.net
>>Subject: More questions...Tiger Side Trim...
>>
>>
>>Listers,
>>The thin chrome side trim on my Tiger was removed and the holes filled
>>(welded up)...then the car was painted.  I have the trim (but no clips) 
>>for
>>the car so I am thinking of putting it back on.
>>
>>Currently my door panels/side windows are out, along with some of my trunk
>>stuff. And inside the doors and the quarter panels I can see some of the
>>holes. So I wondered if this was a good time to to do this.
>>
>>Is there anyone here with experience on putting back the trim?
>>How many clips are required? (40? 50?)
>>Is there a cheaper substitute for the clips?
>>
>>Thanks in advance,
>>Paul
>>
>>_________________________________________________________________
>>Help STOP SPAM with the new MSN 8 and get 2 months FREE*
>>
>>
>>
>
>--
>
>Steve Laifman
>Editor
>http://www.TigersUnited.com
>
>
>

_________________________________________________________________
Protect your PC - get McAfee.com VirusScan Online  
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

<Prev in Thread] Current Thread [Next in Thread>