Steve Laifman wrote:
> Frank,
>
> I have TWO Gano filters.............................
>
> The other was identical, internally, but had a machined brass case
> WITH capture lips for the clamps. This requires periodic uncoupling
> of the input end, and an examination and clean out of the trap. Does
> not come apart in service.
>
Steve:
The brass Gano filter, which I have, does actually come apart for easier
cleaning, which I do. Two very small screws tighten down the outer ring
of the wire mesh screens. Get a very small straight end screwdriver,
sharpen the edge of it a bit, and those screws come out.
Steve Sage
|