David (and others in need),
There are links below to various Tiger front suspension articles. There is
also one by John Crawley (I think), but after searching for an hour I can't
find it anywhere. It regarded putting a reinforcement plate (about 2" in the
inner part of the "horse shoe" of the crossmember (can anyone helpon this).
Hope this helps. Tom
Below is the John Logan reinforcment article at Tigers United:
http://www.tigersunited.com/tech_tips/LoganFulcrum/pt-LoganFulcrum1.asp
Below is the STOA article by Tom Hall regarding grease fittings etc.
http://www.engravers.com/tiger/tech/urethane/ar-STOAbushings1.html
or
http://www.tigersunited.com/articles/th-ub/STOAbushings1.asp
Below is Larry Paulick's article/discussion on the Midget rack/MGB steering
arms and alignment
http://www.tigersunited.com/tech_tips/AckermanAngle/pt-AckermanAngle1.asp
and/or (not sure how similar they are)
http://www.tigersunited.com/tech_tips/PaulickAckerman/pt-PaulickAckerman1.as
p
and
http://www.tigersunited.com/tech_tips/PaulickAlign/pt-PaulickAlign1.asp
----- Original Message -----
From: DAVID GREEN <alpdavegre@msn.com>
To: tigers_autox_t <tigers@autox.team.net>
Sent: Monday, May 26, 2003 11:21 AM
Subject: Front Crossmember reinforcement
> Hi all,
>
> Sorry to have to ask this question but where can I find the reinforcement
> article for the Tiger front cross member. Going to be tearing it down in
the
> next few weeks after I get the rear axle and rear springs put back
together.
> Thanks in advance.
> Dave Green
> B7492549LRXFE (As far apart as it can be)
|