289/302 Conversions

[Carmods@aol.com]

To All,

The stock Tiger MK II clutch cylinder and bracket can be used with the later 
T- 5,
 5.0 L clutch and flywheel housing by remounting the throwout pivot from the 
passenger side of the input shaft to the driver's side, relocating the height 
of the pivot, I think around an inch, and using the earlier throwout arm that 
was used with the top loader. There should be a spring on the arm the will 
apply 10 lb. to the constant running throwout bearing. 

                                                         John Logan