Well, so much for using glasses when you need them. :-(
That Primary Resistance should read 0.6 Ohm. The error was in the
typing, not the meter reading.
The
Steve Laifman wrote:
> Tigers,
>
> I have measured the primary and secondary coil impedance (dc) of my
> Pertronix Flame-Thrower II "0.6 Ohm" coil.
>
> I used a calibrated Fluke D VOM.
>
> The Lead resistance was measured and subtracted from the results.
>
> The Primary Resistance measured 6.00 Ohms
> The Secondary Resistance measured 10,000 Ohms
>
--
Steve Laifman
Editor
http://www.TigersUnited.com
|