In a message dated 12/17/02 7:24:34 AM, edalsj@igs.net writes:
<< By my calculations, this is a nut of no known recognizable size! I don't
have a table of Whitworth nut sizes handy, and that is what it probably is. >>
To further complicate the issue, the same pump with a different diameter nut
was used in several models of the Rootes group as will as at least three
different internal pump designs.
Yes, I've opened a dozen of these pumps that are not working and tried to mix
and match parts to make a working one without success.
Dr. Moonstone
|