stubrennan@attbi.com wrote:
>As I discovered one evening as I gradually lost power on
>my way home, the arm that pulls on the throttle cable
>clamps to the shaft that comes up from the pedal.
>Loosen the clamping bolt, adjust the pedal to a
>comfortable position, and retighten. Oh, and make sure
>the "full throttle" position isn't putting any undue
>stress on the carb linkage, as the cable will now pull
>much further.
>
>Stu
>
Stu and Steve L:
Thanks! That was easy and works just as you describe. The gas pedal
height is now even with the other pedals. As you mention though, the
full throttle position is now way above the accelerator pedal stop on
the floor. I think I need a longer throttle cable, or has anyone come up
with a throttle cable that is length adjustable?
Steve Sage
|