UNF ..... BSF!!!! It never even occurred to me to think that British and US
would differ here.
Sorta begins to give a sense for the value of metric. Live and learn.
TM
----- Original Message -----
From: "John Slade" <edalsj@igs.net>
To: <Sjhcobra1@cs.com>
Cc: <tigers@autox.team.net>
Sent: Wednesday, September 18, 2002 11:19 PM
Subject: Re: Seat screws
Since we didn't seem to be getting anywhere, I went to my spare set of
seats which have never (to my knowledge) been taken apart, and removed
one of what I think are the screws under discussion.
It measures as follows:-
head.....flat head, slotted, 100 degree underneath
length.....2.46"...call it 2 1/2"
diameter.....0.246"...call it 1/4"
thread.....fully threaded 26 tpi
This screw equates to 1/4 British Standard Fine
Hope this helps
John Slade
Manotick, ON
|