> I have some assumptions I would like to check out.
> I have a 89 302 (automatic transmission) from a Grand Marquis that I may
put in the Tiger against the wide ratio top loader trans.
> I assume the 164 tooth flywheel is bigger than the 154 tooth? or same size
flywheel just dirrerent size teeth.
> I assume the bigger flywheel will take a larger clutch and the larger the
clutch
> the better ie a 11 inch is better than a 10 incher.
> If you have a 28 oz. balance on the harmonic balancer you use a 28 balance
on
> the flywheel and the same on the 50 oz. Balancer and flywheel must match?
Or do certain years use certain imbalances. What is the difference between
internal and external imbalance?
> It doesn't make a difference which you use as long as they match? If there
is a
> difference what determines what that difference must be?
> I have a 6 bolt magnesium bellhousing that I will be using with the above.
I
> need to find a starter that matches the # of flywheel teeth and alignment
> position in the bellhousing.
Any help is appreciated so I can begin to gather parts to get the best
prices.
Thanks Lewis
>
>
> http://shop.store.yahoo.com/mustangplace/musgancoolfi.html
>
>
>
>
> This e-mail, including attachments, may include confidential and/or
> proprietary information, and may be used only by the person or entity to
> which it is addressed. If the reader of this e-mail is not the intended
> recipient or his or her authorized agent, the reader is hereby notified
> that any dissemination, distribution or copying of this e-mail is
> prohibited. If you have received this e-mail in error, please notify the
> sender by replying to this message and delete this e-mail immediately.
|