There are 2 type of radio console.
One is a 2 piece with the alloy front cover on the radio section and a
speaker housing that fits underneath it.
The second is a more plain folded metal casing which has the chrome
speaker grill under the radio.
I have both if you need photos.
I have been looking at having some made if anyone else is interested.
regards
Jeff
In message <003301c213ac$81f1b800$0e03aed8@oemcomputer>, Russ Eshelman
<RussE@Firstva.com> writes
>Nick, My original speaker box measurements are, 3" deep X 7 1/2" long X 4
>1/4" high. About an 1/8" larger all the way around than the chrome speaker
>grill. Hope this helps. Your welcome in advance
>Russ
>
>----- Original Message -----
>From: "nick kintner" <nlkin@worldnet.att.net>
>To: "Shaun Laughy" <tigerv8@shaw.ca>; "Tiger List" <tigers@autox.team.net>
>Sent: Tuesday, June 11, 2002 8:38 PM
>Subject: Re: Factory Radio
>
>
>> Does anyone have the measurements of the press-board around the radio
>> speaker. The housing I recently purchased arrived without this piece.
>Thanks
>> in advance. Nick
>> ----- Original Message -----
>> From: Shaun Laughy <tigerv8@shaw.ca>
>> To: Tiger List <tigers@autox.team.net>
>> Sent: Monday, June 10, 2002 8:06 PM
>> Subject: Factory Radio
>>
>>
>> > If anyone has a good digital picture of the factory radio installed in a
>> > car, I would appreciate receiving a copy. I have the LAT picture from
>the
>> > Tigers United website, but I would like to have a good picture of the
>unit
>> > actually installed in the car.
>> >
>> > Thanks,
>> > Shaun
--
Jeff
|