Best is to get a lift. Then you can raise the car, clip the top to the
ceiling, change the oil, and then lower the car. I got a used lift for
about $1,500, not much more than some of these top raisers and you can use
it to do oh so many other things....
Chris Thompson
B382000331
Dave J wrote:
I built mine from scrap 2x4's. I put eyelets in the
4 corners Dan joined them in the middle. I then
bought a pulley system with the most pulley's I
could find. Used lots of rope but I can raise the
entire thing with one hand. Didn't I have some
questions about pulleys and force required in
HS Physics, Finally I put some of that knowledge
to use.
Dave Johnson B382002668(under repair) Aurora, IL
|