Gunny,
Koni could probably supply you with the parts you need. I had a pair of
vintage Konis rebuilt by them. They looked brand new when I got them
back, right down to the water decal on the side.
Peter S.
-----Original Message-----
From: RGGAMMA@aol.com [mailto:RGGAMMA@aol.com]
Sent: Sunday, August 12, 2001 7:54 AM
To: Tigers@autox.team.net
Subject: Rear axle cover gasket
Greetings all,
I attempted to remove the rear shock spacers the PO had put on to make
the
shock longer (Who knows why) only to discover the rubber bushings in the
lower shock eye were GONE.........Anybody have a pair of Koni shock
bushings?(two cone shaped rubber bushes with a steel insert for the
lower
shock mount).
All of the autoparts stores in my neck of the woods have now idea what a
Dana
44 rear cover gasket is. They just want to know what year and make car
it
goes on. When I answer 'Sunbeam Tiger' all I get a a blank
stare......How
about a cross reference to some other car they might recognize?????
My heater blower is inop.............there is a ground wire to chassis,
and
two wires from what looks like a resistor '2" long looks green' to the
switch. There are two wires coming out of the motor......one is to
ground
the other is not attached. I tried to put power to the unattached wire
without success. Any help would be wonderful.
Thanks in advance fellas
Cheers
Gunny
|