Rick,
I think you'll here that the depth in should be 2/3 the blade.
Important to close the gap at the bottom. Adjustment further rearward by
pressing the hub further on the shaft. http://www.TigersUnited.com,
under the General Specifications section of the Workshop manual
specifications, two different measurements for the stock set-up, as
reported by TE/AE.
Steve
--
Steve Laifman < Find out what is most >
B9472289 < important in your life >
< and don't let it get away!>
<SLaifman@SoCal.RR.com>
<http://www.TigersUnited.com/gallery/SteveLaifman.asp>
_/_/_/_/_/_/_/
_/ _/_/_/ _/_/_/ _/
_/ _/ _/ _/ _/ _/ _/_/_/_/
_/ _/ _/ _/ _/ _/ _/
_/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/
_/_/_/
|