-----Original Message-----
From: Larry Paulick [mailto:larry.p@erols.com]
Sent: Wednesday, February 21, 2001 3:48 PM
To: Fraser, Ron
Cc: tigers@autox.team.net
Subject: Re: E-Mail me off the list
Thanks Bob and Ron. Bob, I am going to read your article on the United
list.
<snip>
I have added valve springs before, using a length of rope stuffed in the
spark plug hole to hold the valves up. Didn't have lots of money when I
was a kid, but it worked.
<snip>
If you have to do in-situ valve spring replacement, then make an adapter (or
you can buy them) to put an air hose quick disconnect onto a spark plug
core, and just use compressed air to hold the valves in place.
-Theo
|