Re: Offset d/shaft x-mac-creator="4D4F5353"

[cvaught@hawaii.rr.com]

My tunnel has no indention but it was changed when the floors were replaced.
that could be my problem.
chris in miss

>There's a some offset of the pinion gear/shaft(it's not equidistant
>between the left and right wheels), and on my 1A and some others, the
>tunnel is stamped with an indentation on the passenger side on the rear
>of the tunnel to clear the driveshaft. Are you saying that your
>driveshaft doesnt clear that indentation?