At 09:13 PM 8/30/00 -0400, you wrote:
>Tigers,
>I'm using a McLeod Throw Out bearing. I ran the line tonight from the
>cylinder to the slave and bled the line. All seemed fine. But the
>pedal is now rock solid with no movement.
>
>Any ideas would be greatly appreciated.
>
>Thanks in advance.
1. Is the clutch engaged or released as it now sits?
2. Has the retaining snap ring popped out of the clutch master cylinder?
3. Are you using a Long or a Ceterforce Pressure plate?
4. Describe you bleeding procedure in detail!
These answers may help in solving your problem.
Tom
|