Re: Holley carbs

[BRIBAUM@aol.com]

Send the holley back and get an edelbrock.  I have had much of my own 
troubles as well as most people who have had one.  The Holley is a tough carb 
to setup and is very fussy and picky, and usually doesn't hold its settings.  
I would go with the Edlebrock.  Also I think that a 600 cfm is too big for a 
stock 260-289 motor.  If you do stay with the Holley, you may have 
idling/running problems due to its size being to big.  A 450-500 is fine for 
a stock Tiger.