I use Dan's torque arm kit as mye and only concession to non-originality as
it makes so much difference, and I couldn't get the Traction-Masters at the
time.
After adding some more ponies last spring, I started to get hop again, and
just thought that the setup was more than the bar could handle. Instead, I
saw that I had popped a bolt off of it. Replaced, and am back to no-hp
Unfortunately, can't compare with Traction-Masters. Today, I would
probably go witht the T-M's for the sake of originality, but otherwise
couldn't be happier with what I got from Dan.
Hope this helps...
Chris Thompson
Executive Vice President
Recognition Research, Inc.
1750 Kraft Dr. Suite 2000
Blacksburg, VA 24060
540.961.6500
540.961.3568/fax
cthompson@rrinc.com
www.rrinc.com
B382000331
-----Original Message-----
From: Steve Laifman [SMTP:Laifman@Flash.Net]
Sent: Friday, February 18, 2000 3:08 AM
To: Dr. T. Y. McDowell
Cc: Tigers
Subject: Re: Suspension
Tym,
Regarding Dan's torque arm kit. [Chris Thompson] <snip>
|