In a message dated 2/19/00 5:29:34 PM Eastern Standard Time,
jamesbrt@mindspring.com writes:
<< Yesterday on the way to work it failed and then restarted.
When I started to go home in the evening, the pump started
and them quit completely. Attempted to trouble shoot with
almost no tools and finally determined that the wires were
good, but the pump simply was not turning. Today I took
the proper tools and a meter and found that the pump
leads are open somewhere inside the pump. Replaced the new
pump with the flaky older pump and made it home. >>
Wow!
At least with the OEM tiger pump, I 've usually been able to get home with a
few stiff smacks to unstick the breaker points! If you practice your back
hand enough, you can do this from the driving position!
Good luck,
Paul in PA
|