The bolt is 7/16", the little fastening hex head bolt that screws into the head
of
it is 5/16." But the fastening bolt has an integral lock washer that is about
the
diameter of a 3/4" shaft. If they don't work for you, maybe someone else is hot
for
OEM stuff in the original boxes. Seems to be an addiction for some of us
car-nuts.
Oh--I mislabled one of the parts numbers, the fastener is 359330-S2 and there
are 5
of them.
Al J.
Theo Smit wrote:
> Hi Al,
>
> Thanks for the offer. What size (diameter) are the screws? The reason I ask is
> that the Canton windage tray is drilled to accept the studs, which are the
>same
> size as the bearing cap bolts (7/16?). If I mount the windage tray using
>smaller
> screws it might not locate itself correctly.
>
> Regards,
> Theo
>
> twojohnsons@home.com wrote:
>
> > Theo, I have a box full of Ford OEM mounting bolts for the Boss 302 windage
> > tray. Just checked---6 DOZZ-6345-A, and 5359330-S2 screw & washers. I fitted
|