Mike,
It is easier to install the torque arm incorrectly than it is to install it
correctly. In particular, it is possible to install the wishbone shaped arm
on the driveshaft side or on the outer side of the bracket that mounts
around the differential housing. Also, get good advice on how to adjust
the torque arm. Installation and adjustment make a palpable difference in
the handling of the car.
I recommend that you call Dan Walters (after 9:00 A.M. PST).
Steve Sorenson
Tiger2@telus.net wrote:
> Dear Listers,
>
> I am trying to find someone who can send me the installation
> instructions for a Dan Walters Torque Arm Assembly. I realize that my
> timing is incorrect, I haven't tried to do the installation yet.
> Normally, I would get half way through and then try to find the
> instructions. Who says I can't learn from experience, my wife certainly
> has.
>
> Any help would be most appreciated, it's all powder coated and ready to
> install.
>
> Thanks,
>
> Mike Clark
> B382100417
|