I use a chrome plated brass license plate holder and mount the plate to it
using chrome bullet fasteners. Then I remove the trunk pull handle, center
and drill 2 matching holes through the bottom of the license plate and
frame, then re attach the handle & holder to the trunk using longer screws.
See http://web.cari.net/~herbeam . Bob
----- Original Message -----
From: Tim Beloney <65_s5v6@prontomail.com>
To: <alpines@autox.team.net>; <tigers@autox.team.net>
Sent: Tuesday, October 05, 1999 8:04 PM
Subject: license plates
> I need to tell the painter weather or not to fill the original holes in
the trunk. What are some of the license plate setups for the rear that you
guys are using? I think I prefer it not under the bumper, and was thinking
I'd drill two holes for the CA plate - but it somehow doesn't seem right.
>
> For the front I have the long original bracket. Any off the shelf
brackets you guys are using that look a little better? I suppose I could
easily make something from a metal stip at the hardware store.
>
>
> Thanks,
>
> Tim
>
>
|