tigers
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: INQUIRY 081799c (13)

from [TIGEROOTES] [Permanent Link][Original]
To: TSmit@novatel.ca, tigers@autox.team.net
Subject: Re: INQUIRY 081799c (13)
From: TIGEROOTES@aol.com
Date: Tue, 17 Aug 1999 13:02:47 EDT 
    You can use old races to push new races into a hub, but be certain you 
press or tap on the narrow tapered edge: if you place the races taper to 
taper, and press both races into the hub, there is not a shoulder there to 
push the one you used as your tool back out of the hub!
Jim Leach,  Seattle
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=145162566 Cylinder Head for 1725, herbeam
Next by Date:  RE: INQUIRY 081799c (13), Theo Smit
Previous by Thread:  RE: INQUIRY 081799c (13), Theo Smit
Next by Thread:  RE: INQUIRY 081799c (13), Theo Smit
Indexes:  [Date] [Thread] [Top] [All Lists]