Hi Dan,
Thanks for the interest in my 2-4 Bbl setup. I used the Offenhauser
manifold and Edelbrock 500 cfm carbs. I removed the triangular cross
section "brace" that was on the firewall between the fender support
brackets. The rear carb now clears the firewall by about 3/8". Vertically,
I have room for 1/2" phenolic spacers under each carb to keep the temp of
the carbs down and use the stock hood with no scoop. I plan to do a full
article about the installation in an upcoming Rootes Review ( the Tigers
East / Alpines East newsletter).
Stay tuned.
Jim Morrison
President
TE/AE
----- Original Message -----
From: Daniel S. Eiland <daniel@htg.net>
To: <tsmit@home.com>; <tigers@autox.team.net>
Sent: Monday, July 12, 1999 1:22 AM
Subject: Re: SUNI III.
> Theo,
> Thanks for the photos. You got some great shots. So when are you
giving
> photo lessons to the rest of us? BTW who owns the Tiger with the 2 4bbl's?
> And how did he (or she) fit them in there?
> Dan
> daniel@htg.net
> B382002652LRXFE
>
> -----Original Message-----
> From: tsmit@home.com <tsmit@home.com>
> To: tigers@autox.team.net <tigers@autox.team.net>
> Date: Sunday, July 11, 1999 11:49 AM
> Subject: SUNI III.
>
>
> >Hi Listers,
> >
> >Suni III has come and gone, and it was a great experience. It was a
> >pleasure to meet all the people that otherwise I've only been able to
> >read about or exchange email with, and the number of Tigers to see, the
> >parts available, and the events, combined for a stunning week.
> >
> >I compiled most of the pictures I took into one honkin' big page:
> >http://members.home.net/tsmit/suni.html
> >Download at your leisure ;).
> >
> >Theo Smit
> >tsmit@home.com
> >B382002705
> >
> >
>
|