| To: | KENMATTICE@aol.com |
|---|---|
| Subject: | Re: Ken Mattice, are you out there? |
| From: | James Barrett <jamesbrt@mindspring.com> |
| Date: | Sun, 28 Mar 1999 17:50:17 -0500 |
At 02:10 PM 3/28/99 EST, you wrote:
... Bigger
>stronger spindle building in the "dropped" aspect of the Super Minx spindle.
... Upper and lower ball joints replaced w/ modern for racing screw
>in style. ...
>Best Regards,
>Ken Mattice
Ken,
Could you be a little more specific on the spindle and
ball joints? I.e. Is the taper on the ball joints you used
the same as stock on a Tiger? If so could you spring for the
part numbers?
James Barrett Tiger II 351C and others
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: 351C, James Barrett |
|---|---|
| Next by Date: | Re: Ken Mattice, are you out there?, MWood24020 |
| Previous by Thread: | Re: Ken Mattice, are you out there?, KENMATTICE |
| Next by Thread: | Re: Ken Mattice, are you out there?, MWood24020 |
| Indexes: | [Date] [Thread] [Top] [All Lists] |