> I'm guessing I need to let them know the specifics on:
> * Flywheel size
Depends on what bell housing you are going to use.
>
> * Isn't front cover & water pump Tiger specific?
Yes/No You can "Move the fan mounting flange to correct spacing"
>
> * Any chance that exhaust ports on the various alum heads around are
> not all the same as stock? We have Aluminum Dart JR. heads (similar to
> Canfield)
Don't know but the width of the heads are important I have about .003 clearance
between the
headers and moter mounts.
>
>
> I haven't heard of anyone replacing the belt driven fan with an electric
> fan. You know of a reason why or of anyone who's taken this route? I do see
> a lot of supplemental pusher fans in front of the radiator.
There was a larger thread on this last month check the archives.
>
>
Doug
>
> Your input is appreciated.
>
> Stephen Waybright
|