Mike- All your body seams are old, dryed and crack anyways. Remove and
replace is the only way to go.
Chris in Trinidad
----------
> From: MWood24020@aol.com
> To: bgullatt@mesahq.com; tigers@autox.team.net
> Subject: Re: Stripping
> Date: Wednesday, January 06, 1999 2:07 PM
>
> In a message dated 1/6/99 10:04:16 AM Pacific Standard Time,
> bgullatt@mesahq.com writes:
>
> << I
> use Redi Strip in Evansville, Indiana (Dan Payne). They use an alkali
> solution rather than an acid. It won't come back and haunt you like acid
> dipping does. No seeping seams!. >>
>
> Bill-
> I am going through the same decision process, trying to decide how to get
to
> bare metal.
> I have been told that when you dip the uni-body, you lose all of the
sealants
> used in the manufacturing process, like in the body seams. Are you
telling me
> that alkali based dips don't cause this same headache?
> Thanks-Mike
|