>i'm trying to remove my rear axles to install dale's disc break upgrade.
>i have removed the nuts and bolts holding the back plate.
>i tryed the chain to the hub (held on with the lug nuts) and pulling
>trick i read on these pages, but had no luck. i just want to make sure
>that there is nothing more to remove.i guess the next thing is to get a
>slide hammer.any help would help.
>scott
>B9472628
Do you have to remove the axles or just the hubs? The hubs come off easy
with a hub puller that bolts onto the lug nuts and has a larger screw in
the center that you tighten and then give a few raps with a large hammer.
It worked on mine. regards Armand
ritchie@mcn.org
Armand & Lorie Ritchie
|