Craig Wright wrote:
> They
> boring bare is shifted to place the bore in the center of the remaining walls
> resulting in fairly uniform wall thickness. Sonic testing will tell you if
>you can
> rebore your 260 and how much.
>
> Craig Wright
Craig,
While the core may shift, causing uneven wall thickness and affecting re-bore
capability, the centers of the bores are done with great precicion to put the
pistons
and rods over the crank journals. Are you suggesting a 0.020 to 0.030 bore
offset,
to compensate for a bad jacket thickness, will not adversely affect the
rod/crank
alignment and loads?
--
Steve Laifman < One first kiss, >
B9472289 < one first love, and >
< one first win, is all >
< you get in this life. >
_/_/_/_/_/_/_/
_/ _/_/_/ _/_/_/ _/
_/ _/ _/ _/ _/ _/ _/_/_/_/
_/ _/ _/ _/ _/ _/ _/
_/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/
_/_/_/
|