Top Loader/6 bolt 289 bellhousing

["Robert D. Hogan" <robhogan@freewwweb.com>]

Steve Laifman wrote:

> The Lakewood is a well known, widely used, and respected racing scattershield.

By the way, the Lakewood bellhousing will not fit in an unaltered Tiger
engine compartment due to the rear shoulders' interference with the
firewall. I had to slit, bump inward and weld in small patches in the
firewall to obtain the necessary clearance.  Fabrication of a clutch
slave cylinder bracket to mount on the Lakewood's flange was also
necessary.