At 03:12 PM 6/12/98 -0700, you wrote:
>James Barrett wrote:
>>
>> At 11:04 AM 6/5/98 -0500, you wrote:
>> snip...
>> > On the subject of Panhard rods, MkII's have the Panhard rod mounting
>> > switched to the opposite side, I was told this was to correctly
>> > counteract the torque from the engine.
>> Jeff
>> Jeff,
>> The Panhard rod on my Tiger II is mounted to the frame on the
>> drivers side above the axle. Were the mounts for the rods of the older
>> Tigers on the passanger side? My mounting point broke back in the
>> early 70's. Have not had a problem since rewelding it.
>>
>> James Barrett Tiger II 351C and others
>The question always comes to my mind.... right or left hand drive?
>
Crimmins,
The driver's side is where I set while driving in Melbourne. My
Tiger has it's drive in the middle. Otherwise the motor would not
not fit under the bonnet very well. I hope this answers your question.
James Barrett Tiger II 351C and others
|