Greetings All from Down under (Australia).
I have just joined the Tiger mailing list and it's great!
I have a Tiger with Headers (Cat) and I fitted them loosely to the heads
(all bolts in) after lifting the Engine and gearbox in from below (so as
to not mark firewall). Once Engine in situ I then fitted the front cross
member and did everything up!
Spark plug access OK (it's all relative!)
My car is B9472884 (JAL 562441)
Original Engine 4177 F21KA
SO 2632
As I use the Tiger for Car club hill climbs (stops well uphill!) I've
put the 260 in the corner and fitted a modified 302.
It's fantastic. Heater works better than ever!
I have noticed that a 6 blade fan was once available. Is something
similar readily available now and is it effective? I've fitted a four
row Radiator core and an additional electric fan on front of Radiator
but it still gets hotter than I'd like. What is the optimum running temp
for a 302 Windsor? How hot is too hot? I've never boiled my car (as in
obviously boiling/blowing water) but it's been mighty hot a couple of
times. I've used a decade box and checked the Temp gauge and it seems to
be within +/- 5%. It has been off the dial on more than one occasion but
didn't boil. Is 250F approx boiling point with a 13lb cap (is this
correct?) and coolant?
Does anyone else with a Tiger on this Mailing list reside in Australia
(or even better - Perth, Western Australia)?
Have a great day all
Cheers
David F. Tweddle
Methods and Systems coordinator
Procurement & Logistics Dept.
Mail Drop Point 2.1
Ph. Aust(61) - 08 9348 4371
Fax Aust(61) - 08 9348 4248
B9472884
E-mail david.tweddle@woodside.com.au
> -----Original Message-----
> From: FrizBMG@aol.com [SMTP:FrizBMG@aol.com]
> Sent: Friday, 20 February 19 [Tweddle, David D.] 98 23:40
> To: tigers@autox.team.net
> Subject: Headers
>
> Hi Tigers!
> What are my options for headers for a Mk 1a?How much Spark plug
> access will I
> lose?Are the generic "streeetrod headers" the way to go or is there a
> "Tiger
> -specific" type that works ?The car is on a rotisserie right now with
> the
> front and rear suspension off of it.When I put it back together would
> probably
> be the best time to put headers on it.
> Thanks for your input in Tigerspace
> Tony
|