At 07:31 AM 11/25/97 -0500, you wrote:
>Can someone please give me the approximate diameter of the six bladed fan
(LAT-42/32) available as an option. I'm assuming it'll be about 14".
>
>Thanks in advance, Kirk
>
>
Kirk,
I know you will get many other replies, but here are the basics:
The stamping on the fan you are looking for is: CF-09DE-A. If I did not
get that one right I will e-mail you back later.
When I found mine about a 6 weeks ago at a Mustang shop, it ran me $100.
The guy was nice enought to sand blast it with plastic beads to clean it up
a bit.
Steve Laifman is right. (I read his post first!) The most important
clearance is the steering rack. In order to fit properly in a 1965 MKI, I
had to trim off about 3/8" off of the fan. If Laifman does not mention it
to you, you are better off having a machine shop do the trimming. I did it
myself and it was a bear!! If you require it, e-mail me back and I will
give you the "exact" diameter of my recently modified six blade fan.
Regards,
Allan
B9472373
|