tigers
[Top] [All Lists]

Re: manifold and carb choice

To: alcon@earthlink.net
Subject: Re: manifold and carb choice
From: brockctella@juno.com (Brock C Tella)
Date: Tue, 29 Jul 1997 17:56:31 -0700
I'm running the same set up with a stock hood and original air cleaner.
Obviously there is not enough air flow but for autocross there is more
than adequate H.P.
On Mon, 28 Jul 1997 12:00:48 -0700 Allan Connell <alcon@earthlink.net>
writes:
>At 08:45 PM 7/21/97 -0400, joe brackin wrote:
>>I am considering an Edelbrock Performer with a Holley 1850(600cfm) 
>carb
>>for my rebuilt and balanced 260. Has anybody else used this 
>combination
>>and are you happy with it? Any clearance problems or any suggestions 
>for
>>a better choice?
>>
>>
>>
>
>Joe,
>
>If you are speaking of the double pumper (and I think you are) that is 
>the
>exact set-up I have on my Tigger.  It is a real performer, but there 
>are a
>few things to watch out for.  
>
>First, you should look into a in line, dial-type fuel regulator.  Mine 
>is
>normally set at position # 3 for around town driving.  The PO said 
>that he
>used to dial it up to # 7-9 when he went auto-crossing.  The way it 
>runs
>now, I have not had the guts to dial it up that high yet.......   
>Second,
>you will have trouble fitting an air cleaner under the 
>hood.....especially
>a stock bonnet.  Mine has a LAT style (knock off I think) hood and the 
>PO
>had installed the Edelbrock all foam triangular shaped air cleaner.  
>When I
>took the car to a friend who speciallizes in LBC's he had trouble 
>starting
>it one morning, and in a nearly flooded condition the foam element 
>caught
>fire.....lucky he had a Halon gas extinguisher at hand.  The moral of 
>the
>story is go with some sort of a air cleaner that will not only fit 
>under
>the hood, but utilize a normal style filter.  I finally found a round 
>one
>that would work at Stupid Shops (sorry guys, just don't care for the
>condescending attitude of some of the kids that work there) here in 
>San
>Diego.  It fits on the Holley with no modification and under the LAT 
>hood
>with just a slight modification to the wing nut for clearance.  It 
>easily
>accepts most stock 10" round filters.  Yup, I know that 12" or more 
>would
>give me better air flow, but no room ya'll !!!
>
>Hope this helps and I think you will like the combination.  Consider 
>though
>that I believe that I am a bit "over-carburated" at this juncture.
>
>Regards,
>
>Allan
>B9472373  
>

<Prev in Thread] Current Thread [Next in Thread>