> replacement. If you are new to Tigers some parts are expensive (need
> lots of $$$$) to replace. For example, header tanks, clocks, wood
> steering wheels, etc. Other parts are reasonable if they are shared
>
> Jeff
The current issue of Classic Auto Restorer magazine has an article on
making your own wood rim steering wheel. The example shown was for an
XK120 with an embedded outer frame, but I think the technique could be
applied to wheels with riveted-on wood. The author started with a
plastic rimmed wheel from a Jag sedan which he stripped. A router was
the only power tool required.
The diameter of the wheel in the article had its diameter reduced a bit,
which required some welding work, but that part could be farmed out, if
required.
Not for everyone perhaps, but if you've got more time than money...
The
|