> Spook37211@aol.com wrote
>
> >Does anyone have the list of speedo drive gears by tooth count?
> >Ray
>
>
> I found the following in some old notes I kept; reprinted here _without_ the
> author's permission. You don't mind, David, do you?
>
> >Date: Tue, 26 Mar 96 07:59:04 PST From: davew@sandy.merix.com (David
>Wedeking)
> >Subject: Re: Speedo gear > Follow-up on the discussion about speedo gears.
>In 1990 (engine rebuild summer) I went to Ford
> >for a replacement speedo gear. My original gear was a 15 tooth. It was no
>longer available. Ford
> >provided the following part numbers for replacements:
>
> > 18T CODD-17271-B
> > 17T C0DD-17271-A
> > 16T CODZ-17271-A
> > 15T (no longer available)
>
> >I installed a 16T gear. It made my speedometer reading much more reliable.
>It used to read 80 mph
> >at 70 mph actual, now it is only a couple of mph high.
>
> Larry Wright "I can't get no-- Satis-traction"
>
Also Ford speedo gears come with threads in both pitch configuration;
i.e., left and right. Found this out the hard way when I replaced
the speedo grear on my snake.
Roland
|