On Tue, 17 Dec 1996 22:58:38 -0500 Anita Barrett
<anitabrt@mindspring.com> writes:
>Gary,
> On the subject of flat collectors: I designed my
>headers so that the 4 1 5/8" tubes were aligned side by side
>(horizontally). I then welded the touching edges together,
>Using a thin cardboard templet, I made a flatten cone that wrapped
Thanks Jim, thats kinda the technique I figured out. The 8-9 inches
of collector length is calculated or just what fits?
And I know about welding fumes and breating safety!
Gary
|