Jim-You might try removing all of the vinyl; then prep the metal, and spray
with the "krinkle" paint. Replace the glass with a new mirror. This is
only a suggestion as I am thinking to do the same at some point.
Regards-Chris
On Wed, 24 Apr 1996, J_L_DONALDSON wrote:
> I'm looking for advice as to how I should go about refinishing my interior
> rear view mirror. I had to remove the glass to be resilvered and in doing
> so the "bead" around the edge pretty much fell apart. The glass is now
> adhered to a piece of vinyl which in turn is folded around to the back side
> of the mirror assembly and glued down. I'm not real impressed with this
> and am looking for recommendations as far as how I might recreate the
> factory look.
>
> Thanks,
>
> Jim Donaldson
> 1965 Mk1
> B9470237
>
>
|