I misspoke. it was not cast, but a pressed steel welded header used on
Cooper S's.
I'm assuming they were used on 1275 motors.
From: Miniac7@aol.com [mailto:Miniac7@aol.com]
Sent: Sunday, July 15, 2007 12:16 PM
To: wsthompson@thicko.com; spridgets@autox.team.net;
team-thicko@autox.team.net
Subject: Re: [Spridgets] need a Mini expert
I'm certainly no "expert" but feel the question would be easier to answer if
asked, "What year/model did the Mini NOT have a cast header?" Thinking about
it however, I'm not sure what "cast header" means. The combination
intake/exhaust manifold was cast iron from the very first Mini, before
moving on to a 3 into 1 exhaust only type design, so I am having trouble
figuring out what the question is. Please clarify.
Howard Collins
Virginia Beach, Va.
_____
Get a sneak peak of the all-new AOL.com
<http://discover.aol.com/memed/aolcom30tour/?ncid=AOLAOF00020000000982> .
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/team-thicko
|