--===============7305673433351075990==
boundary="--_com.lge.email_4844479838676600"
----_com.lge.email_4844479838676600
charset=utf-8
Content-Transfer-Encoding: 8bit
I just experienced something I do not recall ever encountering.  I took a
cast iorn water pump out of a 1275 that did not leak. Leakage is not the
issue.  I put the pump in another 1275 . Cleaned both gasket surfaces ,
new gasket , new bypass hose & clamps. Put the pump on the motor and go have
dinner while the pulley paint dries. Head out to put the pulley on and
attempt to rotate the pump and it's locked up! I stuck two bolts in the pump
hub and try to turn it. It moves but it's grinding itself on something.Â
Take it apart...the impeller has a raised ring on the back side and it's shiney
from my rotating it .  I try to disc grind the ring a bit and it now rotates
bolted in place .  I saw no manufacturers marks on it at all. So has
anyone encountered this before?  Does this pump require an extra thick
gasket or double gaskets ?  I just find it odd it comes out of 1 motor and
into another one and it did not fit.ChuckSent from my LG Mobile
----_com.lge.email_4844479838676600
charset=utf-8
Content-Transfer-Encoding: 8bit
<html><head>
</head>
<body>
<div style="font-size: 10pt;"><div dir="auto">I just experienced something
I do not recall ever encountering. </div><div dir="auto">I took a
cast iorn water pump out of a 1275 that did not leak. Leakage is not the
issue. I put the pump in another 1275 . Cleaned both gasket
surfaces , new gasket , new bypass hose & clamps. Put the pump on the
motor and go have dinner while the pulley paint dries. Head out to put
the pulley on and attempt to rotate the pump and it's locked up! I stuck
two bolts in the pump hub and try to turn it. It moves but it's grinding
itself on something. Take it apart...the impeller has a raised ring on
the back side and it's shiney from my rotating it . I try to disc
grind the ring a bit and it now rotates bolted in place . I saw no
manufacturers marks on it at all. So has anyone encountered this
before? </div><div dir="auto">Does this pump require an extra thick
gasket or double gaskets ? </div><div dir="auto">I just find it odd
it comes out of 1 motor and into another one and it did not fit.</div><div
dir="auto">Chuck</div><div dir="auto"><br></div><div><div dir="auto"
style="font-size:9pt;"><i>Sent from my LG Mobile</i></div></div></div>
</body></html>
----_com.lge.email_4844479838676600--
--===============7305673433351075990==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/pipermail/spridgets http://autox.team.net/archive
--===============7305673433351075990==--
|