--===============3873441636052087750==
--001a113f1f209f27b9050e8c1653
I planned on pressing the new bearings I got from Peter on but they are
ball and not tapered roller. I assume a little heat may help... I will
ask Peter about shims as I don't have any. These are wire hubs - any
tricks in getting them off? Use a puller? Use a puller on the old
bearings? Thanks for all the input guys!!
Cheers!!
Jim
On Sat, Feb 7, 2015 at 7:54 PM, Ron Soave via Spridgets <
spridgets@autox.team.net> wrote:
> Harbor Freight actually has a little $30 press that's great for beating
> pressing. Thou shalt not pound.
>
> Ron Soave
>
> On Feb 7, 2015, at 7:25 PM, Bob Spruck via Spridgets <
> spridgets@autox.team.net> wrote:
>
> One of the things I just learned from a trusted mechanic after replacing
> front and rear bearings many times over the years was this.
>
> When pushing the bearing/hub assembly onto the axle, use a drift against
> the outer race of the bearing. If you push or pound on the hub, you take
> the chance of the bearing disengaging from the hub. The result is the hub
> sits firmly against the backing plate, but the bearing stands proud of the
> hub just a bit. I also use an old outer race to tap on so it exerts
> pressure equally around the new outer race so the bearing does not cock as
> you try to press it home.
>
> Bob
>
>
>
> On 2/7/2015 7:14 PM, bmwwxman . via Spridgets wrote:
>
> Any tips or tricks to replacing front wheel bearings on my MKIII Midget??
>
>
> --
> Cheers!!
> Jim Johnson
> High Plains Youth Hockey <http://www.highplainsyouthhockey.org>
> Dodge City Trail of Fame <http://www.DodgeCityTrailofFame.org>
> Electronic Journal of Severe Storms Meteorology <http://www.EJSSM.org>
>
> *"Tact is the ability to tell someone to go to hell in such a way that
> they look forward to the trip."*
>
> *Winston Churchill*
>
>
>
> ------------------------
> spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/raspruck@gmail.com
>
>
> ------------------------
>
> spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/soavero@yahoo.com
>
>
> ------------------------
>
> spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/bmwwxman@gmail.com
>
>
--
Cheers!!
Jim Johnson
High Plains Youth Hockey <http://www.highplainsyouthhockey.org>
Dodge City Trail of Fame <http://www.DodgeCityTrailofFame.org>
Electronic Journal of Severe Storms Meteorology <http://www.EJSSM.org>
*"Tact is the ability to tell someone to go to hell in such a way that they
look forward to the trip."*
*Winston Churchill*
--001a113f1f209f27b9050e8c1653
Content-Transfer-Encoding: quoted-printable
<div dir=3D"ltr">I planned on pressing the new bearings I got from Peter on=
but they are ball and not tapered roller.=C2=A0 I assume a little heat may=
help... =C2=A0 I will ask Peter about shims as I don't have any.=C2=A0=
These are wire hubs - any tricks in getting them off?=C2=A0 Use a puller? =
=C2=A0 Use a puller on the old bearings?=C2=A0 Thanks for all the input guy=
s!!<div><br></div><div>Cheers!!<br>Jim</div></div><div class=3D"gmail_extra=
"><br><div class=3D"gmail_quote">On Sat, Feb 7, 2015 at 7:54 PM, Ron Soave =
via Spridgets <span dir=3D"ltr"><<a href=3D"mailto:spridgets@autox.team.=
net" target=3D"_blank">spridgets@autox.team.net</a>></span> wrote:<br><b=
lockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1px =
#ccc solid;padding-left:1ex"><div dir=3D"auto"><div>Harbor Freight actually=
has a little $30 press that's great for beating pressing. Thou shalt n=
ot pound.=C2=A0<br><br>Ron Soave</div><div><div class=3D"h5"><div><br>On Fe=
b 7, 2015, at 7:25 PM, Bob Spruck via Spridgets <<a href=3D"mailto:sprid=
gets@autox.team.net" target=3D"_blank">spridgets@autox.team.net</a>> wro=
te:<br><br></div><blockquote type=3D"cite"><div>
=20
=20
=20
=20
<font size=3D"+1"><font face=3D"Arial">One of the things I just learned
from a trusted mechanic after replacing front and rear bearings
many times over the years was this.</font></font><br>
<br>
When pushing the bearing/hub assembly onto the axle, use a drift
against the outer race of the bearing. If you push or pound on the
hub, you take the chance of the bearing disengaging from the hub.
The result is the hub sits firmly against the backing plate, but the
bearing stands proud of the hub just a bit. I also use an old outer
race to tap on so it exerts pressure equally around the new outer
race so the bearing does not cock as you try to press it home.<br>
<br>
Bob<br>
<br>
<br>
<br>
<div>On 2/7/2015 7:14 PM, bmwwxman . via
Spridgets wrote:<br>
</div>
<blockquote type=3D"cite">
<div dir=3D"ltr">Any tips or tricks to replacing front wheel
bearings on my MKIII Midget?? =C2=A0
<div><br>
-- <br>
<div>
<div dir=3D"ltr">Cheers!!<br>
Jim Johnson<br>
<a href=3D"http://www.highplainsyouthhockey.org" target=3D"_b=
lank">High Plains Youth Hockey</a><br>
<a href=3D"http://www.DodgeCityTrailofFame.org" target=3D"_bl=
ank">Dodge City Trail of Fame </a><br>
<a href=3D"http://www.EJSSM.org" target=3D"_blank">Electronic=
Journal of Severe Storms
Meteorology</a><br>
<br>
<font color=3D"black" face=3D"arial"><font color=3D"black" fa=
ce=3D"arial"><font color=3D"#000000" face=3D"Arial"><font style=3D"backgrou=
nd-color:transparent" color=3D"#000000" face=3D"Arial"><font color=3D"#0000=
00" face=3D"Arial">
<div><u>"<font size=3D"3"><b>Tact is the abili=
ty
to tell someone to go to hell in such a
way that they look forward to the trip.&quo=
t;</b></font></u></div>
<div>=C2=A0</div>
<div><font color=3D"#008000" size=3D"3"><b>Winston
Churchill</b></font></div>
</font></font></font></font></font><br>
</div>
</div>
</div>
</div>
<br>
<fieldset></fieldset>
<br>
<pre>------------------------
<a href=3D"mailto:spridgets@autox.team.net" target=3D"_blank">spridgets@aut=
ox.team.net</a>
//www.team.net/donate.html</a>
Archive: <a href=3D"http://www.team.net/archive" target=3D"_blank">http://w=
ww.team.net/archive</a>
Forums: <a href=3D"http://www.team.net/forums" target=3D"_blank">http://www=
.team.net/forums</a>
ets/raspruck@gmail.com" target=3D"_blank">http://autox.team.net/mailman/opt=
ions/spridgets/raspruck@gmail.com</a>
</pre>
</blockquote>
<br>
=20
</div></blockquote></div></div><blockquote type=3D"cite"><div><div><div cla=
ss=3D"h5"><span>------------------------</span><br><span></span><br><span><=
a href=3D"mailto:spridgets@autox.team.net" target=3D"_blank">spridgets@auto=
x.team.net</a></span><br><span></span><br><span>Donate: <a href=3D"http://w=
ww.team.net/donate.html" target=3D"_blank">http://www.team.net/donate.html<=
/a></span><br><span>Suggested annual donation: $12.75</span><br><span></spa=
n><br><span>Archive: <a href=3D"http://www.team.net/archive" target=3D"_bla=
nk">http://www.team.net/archive</a></span><br><span>Forums: <a href=3D"http=
://www.team.net/forums" target=3D"_blank">http://www.team.net/forums</a></s=
pan><br></div></div><span>Unsubscribe/Manage: <a href=3D"http://autox.team.=
net/mailman/options/spridgets/soavero@yahoo.com" target=3D"_blank">http://a=
utox.team.net/mailman/options/spridgets/soavero@yahoo.com</a></span><br></d=
iv></blockquote></div><br>------------------------<br>
<br>
<a href=3D"mailto:spridgets@autox.team.net">spridgets@autox.team.net</a><br=
>
<br>
//www.team.net/donate.html</a><br>
<br>
Archive: <a href=3D"http://www.team.net/archive" target=3D"_blank">http://w=
ww.team.net/archive</a><br>
Forums: <a href=3D"http://www.team.net/forums" target=3D"_blank">http://www=
.team.net/forums</a><br>
ets/bmwwxman@gmail.com" target=3D"_blank">http://autox.team.net/mailman/opt=
ions/spridgets/bmwwxman@gmail.com</a><br>
<br></blockquote></div><br><br clear=3D"all"><div><br></div>-- <br><div cla=
ss=3D"gmail_signature"><div dir=3D"ltr">Cheers!!<br>Jim Johnson<br><a href=
=3D"http://www.highplainsyouthhockey.org" target=3D"_blank">High Plains You=
th Hockey</a><br><a href=3D"http://www.DodgeCityTrailofFame.org" target=3D"=
_blank">Dodge City Trail of Fame </a><br><a href=3D"http://www.EJSSM.org" t=
arget=3D"_blank">Electronic Journal of Severe Storms Meteorology</a><br><br=
><font color=3D"black" face=3D"arial"><font color=3D"black" face=3D"arial">=
<font color=3D"#000000" face=3D"Arial"><font style=3D"background-color:tran=
sparent" color=3D"#000000" face=3D"Arial"><font color=3D"#000000" face=3D"A=
rial"><div><u>"<font size=3D"3"><b>Tact is the ability to tell someone=
to go to=20
hell in such a way that they look forward to the=20
trip."</b></font></u></div>
=20
<div><font size=3D"3"><b></b></font>=C2=A0</div>
=20
<div><font size=3D"3" color=3D"#008000"><b>Winston=20
Churchill</b></font></div></font></font></font></font></font><br><div style=
=3D"display:inline"></div><div style=3D"display:inline"></div><div style=3D=
"display:inline"></div></div></div>
</div>
--001a113f1f209f27b9050e8c1653--
--===============3873441636052087750==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/archive
--===============3873441636052087750==--
|